Telit Wireless Solutions LE910C series - AT#ATRUNDELAY - Set the Delay on Run at Command Execution

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1544 of 1904 2022-03-04
Not Subject to NDA
3.23.11. AT#ATRUNDELAY - Set the Delay on Run AT Command Execution
It has no effect and is included only for backward compatibility.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#ATRUNDELAY=<srv>,<delay>
It has no effect and is included only for backward compatibility.
Parameters:
Name
Type
Default
Description
<srv>
integer
0
service affected by the configuration
Values:
0
:
TCP Run AT service
1
:
SMS Run AT service
<delay>
integer
0
value of the delay, in seconds
Value:
0÷30
:
supported range
AT#ATRUNDELAY?
Read command returns the current settings of parameters in the format:
#ATRUNDELAY: 0, <delayTCP>
#ATRUNDELAY: 1, <delaySMS>
OK