Telit Wireless Solutions LE910C series - AT#VSIMSETPROF - Set Virtual SIM Profile

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 925 of 1904 2022-03-04
Not Subject to NDA
3.10.30. AT#VSIMSETPROF - Set Virtual SIM profile
This command selects and activates a Virtual SIM profile.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#VSIMSETPROF=<profId>[,<storeNewMode>]
Execution command selects and activates a Virtual SIM profile or
deactivates the Virtual SIM profile and instructs the device to use the
UICC, using the unconditional activation (i.e. without any possibility to fall
back).
Parameters:
Name
Type
Default
Description
<profId>
integer
0
indicates the profile identifier.
Values:
0
:
the profile 0 represents the UICC
1
:
refer to the secured storage table that
includes all the subscription data
<storeNewMode>
integer
1
Flag to store <profId> selection
in file system.
Values:
0
:
do not store <profId> in file system
1
:
store <profId> in file system
SET, READ, TEST commands return always immediate ERROR if
Virtual SIM application is not present\corrupted or wrong key is
present.