Telit Wireless Solutions LE910C series - AT#DWSEND - Send Data to Iot Portal

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1570 of 1904 2022-03-04
Not Subject to NDA
3.25.2. AT#DWSEND - Send Data to IoT Portal
The command is related to sending data to the IoT Portal
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#DWSEND=<type>,<param_1>[,<param_2>[,...[,<param_N>]]]
Execution command permits to send formatted data to the IoT Portal.
Parameters:
Name
Type
Default
Description
<type>
integer
0
code for the type of
message to send.
Values:
0
:
normal request
1
:
method request
2
:
method update
3
:
method ack
<param_1>
string
-
the meaning of the
<param_1> parameter
depends on the values of
<type>. Refer to Additional
info section.
<param_2>...<param_N>
string
-
the meaning of the
<param_2> ... <param_N>
parameters depends on
the values of <type>. Refer
to Additional info section.
Additional info: