Telit Wireless Solutions LE910C series - AT#MQCFG - Configure MQTT Parameters

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1782 of 1904 2022-03-04
Not Subject to NDA
3.32.5. AT#MQCFG - Configure MQTT Parameters
This command sets the connection parameters for the selected MQTT client
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MQCFG=<instance_number>,<host_name>,<port>,<cid>[,<ssl_en>]
Set command sets the connection parameters for the selected MQTT
client
Parameters:
Name
Type
Default
Description
<instance_number>
integer
N/A
Selects the client instance. The
list of available clients is
obtained with AT#MQEN? or the
read command.
Value:
1÷maxClients
:
client instance range. To
know maxClients value use
test command
<host_name>
string
-
URL of the MQTT broker
<port>
integer
N/A
TCP port of the MQTT broker
Value:
1÷65535
:
TCP port range
<cid>
integer
N/A
PDP Context ID to be used for
the connection
Value:
1÷maxCid
:
<cid> Range