Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1222 of 1904 2022-03-04
Not Subject to NDA
3.17.4. AT#GPRS - GPRS Context Activation
This command deactivate or activate authentication process
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
Yes
-
2
AT#GPRS=[<mode>]
Execution command deactivates/activates the GPRS context, eventually
proceeding with the authentication with the parameters given with
#PASSW and #USERID.
Parameter:
Name
Type
Default
Description
<mode>
integer
N/A
GPRS context activation mode
Values:
0
:
GPRS context deactivation request
1
:
GPRS context activation request
Additional info:
In the case that the PDP context #1 has been activated, the result
code:if IPV4 or IPV6 PDP context:
+IP: <ip_address_obtained>
OK
For DUAL STACK IPV4V6 PDP context#1
+IP: [<ipAddrV4>],[<ipAddrV6]
Name
Type
Default
Description

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English