Telit Wireless Solutions LE910C series - Page 1223

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1223 of 1904 2022-03-04
Not Subject to NDA
<ipAddrV4>
string
-
ip address ipv4(if v4 PDP context
activated)
<ipAddrV6>
string
-
ip address ipv6(if v6 PDP context
activated)
This command is valid only for Context 1.
In case of Verizon, This command is valid only for Context 3.
It is strongly recommended to use the same command (e.g.
#GPRS) to activate the context, deactivate it and interrogate about
its status.
AT#GPRS?
Read command reports the current status of the GPRS context, in the
format:
#GPRS: <status>
Additional info:
parameter meaning,
Name
Type
Default
Description
<status>
integer
N/A
status of PDP context
Values:
0
:
GPRS context deactivated
1
:
GPRS context activated