Telit Wireless Solutions LE910C series - AT+VTD - Tone Duration

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 87 of 1904 2022-03-04
Not Subject to NDA
3.1.11. AT+VTD - Tone Duration
This command sets the length of tones transmitted with +VTS command.
3GPP TS 27.007
TIA IS-101
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Common
profile
No
-
2
AT+VTD=<duration>
Set command refers to an integer <duration> that defines the length of
tones emitted with +VTS command.
Parameter:
Name
Type
Default
Description
<duration>
integer
2
duration of a tone
Values:
0
:
the duration of every single tone is dependent
on the network
1÷255
:
duration of every single tone in 1/10 sec
AT+VTD?
Read command reports the current Tone Duration, in the format:
<duration>
AT+VTD=?