Telit Wireless Solutions LE910C series - AT+CCWA - Call Waiting

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 527 of 1904 2022-03-04
Not Subject to NDA
3.4.55. AT+CCWA - Call Waiting
This command allows control of the supplementary service Call Waiting. Activation,
deactivation and status query are supported.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT+CCWA=[<n>[,<cmd>[,<class>]]]
Set command allows to enable/disable of the presentation of the URC to
the TE when call waiting service is enabled; it also permits to activate,
deactivate and query the status of the call waiting service.
The URC has the following format:
+CCWA: <number>,<type>,<class>[,<alpha>][,<cli_validity>]
Parameters:
Name
Type
Default
Description
<n>
integer
0
Enables/disables the presentation of an
unsolicited result code
Values:
0
:
disable
1
:
enable
<cmd>
integer
0
Enables/disables or queries the service at
network level
Values: