Telit Wireless Solutions LE910C series - Page 528

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 528 of 1904 2022-03-04
Not Subject to NDA
0
:
disable
1
:
enable
2
:
query status
<class>
integer
7
sum of integers each representing a class
of information which the command refers
to; default is 7 (voice + data + fax)
35. 1 voice(telephony)
36. 2 data
37. 4 fax (facsimile services) (not
supported by LTE)
38. 8 short message service
39. 16 data circuit sync
40. 32 data circuit async
41. 64 dedicated packet access
42. 128 dedicated PAD access
Value:
1÷255
:
class of information
Unsolicited fields:
Name
Type
Description
<number>
string
Phone number of calling address in format
specified by <type>
<type>
integer
Type of address in integer format
Values:
128
:
both the type of number and the
numbering plan are unknown
129
:
Unknown type of number and
ISDN/Telephony numbering plan
145
:
International type of number and
ISDN/Telephony numbering plan
(contains the character "+")