Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 529 of 1904 2022-03-04
Not Subject to NDA
161
:
National type of number and
ISDN/Telephony numbering plan
<class>
integer
See before
<alpha>
string
Alphanumeric representation of <number>
corresponding to the entry found in phonebook;
used character set should be the one selected
with +CSCS.
<cli_validity>
integer
This parameter can provide details why
<number> does not contain a calling party BCD
number.
Values:
0
:
CLI valid
1
:
CLI has been withheld by the originator
2
:
CLI is not available due to interworking
problems or limitations of originating
network
The response to the query command is in the format:
+CCWA: <status>,<class
1
>[<CR><LF>
+CCWA: <status>,<class
2
>[ ... ]]
where
<status> represents the status of the service:
0 - inactive
1 - active
<class
n
> - same as <class>
If parameter <cmd> is omitted then network is not interrogated.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English