Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1418 of 1904 2022-03-04
Not Subject to NDA
3.20.3. AT#HTTPRCV - Receive HTTP Server Data
This command permits the user to read data from HTTP server in response to a previous
HTTP module request.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#HTTPRCV=<prof_id>,[<maxByte>]
Execution command permits the user to read data from HTTP server in
response to a previous HTTP module request.
The module is notified of these data by the #HTTPRING URC.
The device shall prompt a three character sequence
<less_than><less_than><less_than> (IRA 60, 60, 60) followed by the data.
If reading ends successfully, the response is OK; otherwise an error code
is reported.
Parameters:
Name
Type
Default
Description
<prof_id>
integer
N/A
profile identifier
Value:
0÷2
:
profile identifier
<maxByte>
integer
0
max number of bytes to read at a time
Values:
0
:
means infinite size
64÷1500
:
supported range
if <maxByte> is unspecified, server data will be transferred all in
once.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English