Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1665 of 1904 2022-03-04
Not Subject to NDA
3.28.1.5. AT$LCSLK - Lock Context for LCS Use
The command is used to reserve or release a cid for LCS Location Services
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$LCSLK=<mode>[,<cid>]
Set command is used to reserve a specified cid or release the current cid
for LCS Location Services.
Parameters:
Name
Type
Default
Description
<mode>
integer
0
Lock a specified cid / Unlock the current
cid
Values:
0
:
unlock the current cid available for LCS use
1
:
lock the specified cid in order to setup/release a
control link for LCS use only
<cid>
integer
-
specifies a PDP context definition (see
+CGDCONT command).
The <cid> is mandatory if <mode> is set to lock, otherwise shall be
omitted
The set command returns ERROR if the current cid and/or the
previously set are in use
If <mode> is set to unlock, The CID shouldn't be specified. Locked
one will be released automatically.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English