Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1815 of 1904 2022-03-04
Not Subject to NDA
3.32.17. AT#MQWIPP - Set WILL Property for MQTT Transmission
Set WILL Property for MQTT Transmission
MQTT Version 5.0
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#MQWIPP=<instance_number>,<identifier>,<value>[,<user_property_name>[,<
user_property_value>]]
Set command sets the WILL property for the selected MQTT client
Parameters:
Name
Type
Default
Description
<instance_number>
integer
-
Selects the client instance.
The list of available clients
is obtained with
AT#MQEN? or the read
command.
<identifier>
integer
N/A
Property identifier.
Values:
1
:
0x01, Payload Format Indicator.
<value> mapping to this identifier
should be an integer
2
:
0x02, Message Expiry Interval.
<value> mapping to this identifier
should be an integer
3
:
0x03, Content Type. <value> mapping
to this identifier should be a string

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English