Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1816 of 1904 2022-03-04
Not Subject to NDA
8
:
Response Topic. <value> mapping to
this identifier should be a string
24
:
0x18, Will Delay Interval. <value>
mapping to this identifier should be
an integer
38
:
0x26, User Property. <value>
mapping to this identifier stands for
the user property index, which can be
only set to 1 currently
<value>
integer
-
Value of the property
identifier
<user_property_name>
string
-
User property name, string
type. Valid and mandatory
if the <identifier> set to 38
<user_property_value>
string
-
User property value, string
type. Valid and mandatory
if the <identifier> set to 38
This command only valid if the MQTT version of the corresponding
<instance_number> is set to v5.0
AT#MQWIPP?
Read command reports the currently selected parameters in the format:
#MQWIPP: <instance_number>,<identifier>,<value>
<instance_number>,<identifier>,<value>
...
<instance_number>,<identifier>,<value>
AT#MQWIPP=?

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English