Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 477 of 1904 2022-03-04
Not Subject to NDA
3.4.37. AT+CEREG - EPS Network Registration Status
This command monitors the Evolved Packet System (EPS) network registration status in
LTE.
[1] 3GPP TS 24.008
[2] 3GPP TS 24.301
[3] 3GPP TS 25.331
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CEREG=[<mode>]
Set command enables/disables the EPS network registration unsolicited
result code (URC) in LTE, and selects one of the available formats:
short format: +CEREG: <stat>
long format: +CEREG: <stat>[,[<tac>],[<ci>],[<AcT>]]
<tac>, <ci>, and <AcT> are reported by the command only if available.
In case of error, possible response(s): +CME ERROR: <err>
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enables/disables the network registration
unsolicited result code (URC), and selects
one of the available formats.
The following events trigger the URC:
URC short format is displayed every time
there is a change in the EPS network
registration status.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English