Telit Wireless Solutions LE910C series - AT+CGSMS - Select Service for MO SMS Messages

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 615 of 1904 2022-03-04
Not Subject to NDA
3.6.11. AT+CGSMS - Select Service for MO SMS Messages
Set command is used to specify the service or service preference that the MT will use to
send MO SMS messages.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CGSMS=[<service>]
Parameter:
Name
Type
Default
Description
<service>
integer
1
indicates the service or service
preference to be used
Factory default for VZW&NTT FW is 3.
Values:
0
:
Packet Domain
1
:
circuit switched
2
:
Packet Domain preferred (use circuit switched if
GPRS not available)
3
:
circuit switched preferred (use Packet Domain if
circuit switched not available)
Entering AT+CGSMS= returns OK but has no effect.