Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 511 of 1904 2022-03-04
Not Subject to NDA
3.4.49. AT#NWSCANTMR - Network Scan Timer
This command sets the Network Scan Timer.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#NWSCANTMR=<tmr>
Set command sets the Network Scan Timer that is used by the module to
schedule the next network search when it is without network coverage (no
signal).
Parameter:
Name
Type
Default
Description
<tmr>
integer
5
timer value in units of seconds
Value:
5÷3600
:
time in seconds
Additional info:
Execution command reports time, in seconds, when the next scan
activity will be executed. The format is:
#NWSCANTMREXP: <time>
Name
Type
Default
Description
<time>
integer
-
Remained time of <tmr>.
if <time> is zero it means that the
timer is not running.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English