Telit Wireless Solutions LE910C series - AT#BND - Select Band

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 439 of 1904 2022-03-04
Not Subject to NDA
3.4.25. AT#BND - Select Band
This command selects RF bands
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#BND=<band>[,<UMTS_band>[,<LTE_band>[,<TDSCDMA_band>]]]
Set command selects the current GSM, UMTS, LTE, and TDSCDMA bands.
Parameters:
Name
Type
Default
Description
<band>
integer
N/A
GSM band selection. The default
value depends on the product.
Values:
0
:
GSM 900 MHz + DCS 1800 MHz
1
:
GSM 900 MHz + PCS 1900 MHz
2
:
GSM 850 MHz + DCS 1800 MHz
3
:
GSM 850 MHz + PCS 1900 MHz
4
:
GSM 900 MHz + DCS 1800 MHz + PCS 1900
MHz
5
:
GSM 900 MHz + DCS 1800 MHz + PCS 1900
MHz + GSM 850 MHz
<UMTS_band>
integer
N/A
UMTS band selection. The
default value depends on the
product.
Values:
0
:
B1 (2100 MHz)