Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 983 of 1904 2022-03-04
Not Subject to NDA
3.12.1.14. AT#HSGS - Headset GPIO Select
This command used to select the headset GPIO for headset detect.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#HSGS=<n>
Set command select the headset GPIO for headset detect.
Parameter:
Name
Type
Default
Description
<n>
integer
-
GPIO number for headset detect, Valid range
is "any input/output pin" (see "Hardware
User's Guide").
- See on "Hardware User's Guide" Headset detection HW
instructions.
- Default value is 0, which means no Headset pin set.
- This command Influence on #GPIO and vice versa.
- This parameter is saved in NVM.
AT#HSGS?
Read command returns the current status of headset detection in the
format:
When <n> not Zero
#HSGS: <n>,<status>
<n> equal to Zero
#HSGS: <n>
where:
<n> - Selected the GPIO number.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English