Telit Wireless Solutions LE910C series - AT Run; AT#SMSATRUN - Enable SMS Run at Service

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1523 of 1904 2022-03-04
Not Subject to NDA
AT Run
3.23.1. AT#SMSATRUN - Enable SMS Run AT Service
This command enables/disables the SMS AT RUN service.
Telit Running AT Commands Remotely Application Note, 80000NT10029a
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SMSATRUN=<mod>
Set command enables/disables the SMS AT RUN service.
Parameter:
Name
Type
Default
Description
<mod>
integer
0
enables/disables the SMS AT RUN service
Values:
0
:
Service Disabled
1
:
Service Enabled
When the service is active on a specific AT instance (see
#SMSATRUNCFG), that instance cannot be used for any other
scope, except for OTA service that has the highest priority.
For example, in the multiplexer request to establish the Instance,
the request will be rejected.
AT#SMSATRUN?