Telit Wireless Solutions LE910C series - AT#TCPATRUNAUTH - TCP at Run Authentication Parameters List

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1535 of 1904 2022-03-04
Not Subject to NDA
3.23.6. AT#TCPATRUNAUTH - TCP AT Run Authentication Parameters List
This command manages the authentication parameters for the TCPATRUN connection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#TCPATRUNAUTH=<action>,<userid>,<passw>
Execution command controls the authentication parameters for the
TCPATRUN connection.
Parameters:
Name
Type
Default
Description
<action>
integer
N/A
command action
Values:
0
:
remove selected chain
1
:
add an ACCEPT chain
2
:
remove all chains (DROP everything); <userid> and
<passw> has no meaning in this case.
<userid>
string
-
username to be added into the
ACCEPT chain. The maximum parameter
permitted length is 50 characters.
<passw>
string
-
password of the user on the <userid>. The
maximum parameter permitted length is
50 characters.
A maximum of 3 entries (password and userid) can be present at
same time in the list.