Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1286 of 1904 2022-03-04
Not Subject to NDA
3.17.28. AT#GDATAVOL - PS Data Volume
The command resets data counters or reports data counts of the PS sessions.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#GDATAVOL=[<mode>]
Execution command reports, for every active PDP context, the amount of
data the last PS session received and transmitted, or it will report the total
amount of data received and transmitted during all past PS sessions, since
last reset.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
resets or
reads data
counters.
Values:
0
:
resets the PS data counter for the all the available
PDP contexts (1-16)
1
:
reports the last PS session data counter for the all the
set PDP contexts (i.e. all the PDP contexts with APN
parameter set using +CGDCONT). Refer to Additional
info section to see the format.
2
:
reports the total PS data counter, since last reset, for
the all the set PDP contexts (i.e. all the PDP context
with APN parameter set using +CGDCONT). Refer to
Additional info section to see the format.
Additional info:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English