Telit Wireless Solutions LE910C series - AT#QDNS - Query DNS

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1278 of 1904 2022-03-04
Not Subject to NDA
3.17.24. AT#QDNS - Query DNS
The command executes a DNS query
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#QDNS[=<host name>]
Execution command executes a DNS query to solve the host name into an
IP address.
Parameter:
Name
Type
Default
Description
<host name>
string
-
Host name string
Additional info:
If the DNS query is successful then the IP address will be reported
in the result code:
#QDNS: <host name>,<IP address>[,<userIpType>]
Name
Type
Default
Description
<IP address>
string
-
this parameter is in the format:
xxx.xxx.xxx.xxx
<userIpType>
integer
N/A
In dual stack case the user can
choose the ip type to get IP
address. According to this
parameter DNS request will be
sent
Values: