Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 84 of 1904 2022-03-04
Not Subject to NDA
3.1.9. AT#CESTHLCK - Call Establishment Lock
This command can be used to disable call abort before the DCE enters connected state.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT#CESTHLCK=[<closure_type>]
Parameter:
Name
Type
Default
Description
<closure_type>
integer
0
dummy
parameter
Values:
0
:
Aborting the call setup by reception of a
character is generally possible at any time
before the DCE enters connected state
1
:
Aborting the call setup is disabled until the
DCE enters connected state
AT#CESTHLCK?
Read command returns the current value of the parameter
<closure_type> in the format:
#CESTHLCK: <closure_type>
AT#CESTHLCK=?
Test command returns the supported values of the parameter
<closure_type>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English