Telit Wireless Solutions LE910C series - Page 83

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 83 of 1904 2022-03-04
Not Subject to NDA
0
:
CFU disabled
1
:
CFU enabled
<fwdtonum>
string
Reports phone number used to forward the
incoming calls
AT#CFF?
Read command reports whether the presentation of the call forwarding
flags URC is currently enabled or not.
Moreover, if the flags field is present in the SIM, it reports the current
status of the call forwarding flags as they are currently stored on SIM and
the number incoming calls are forwarded to.
The format is:
#CFF: <enable>[,<status>,< fwdtonum >]
AT#CFF=?
Test command returns the range of available values for parameter
<enable>