Telit Wireless Solutions LE910C series - S Parameters; ATS0 - Number of Rings to Auto Answer

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 261 of 1904 2022-03-04
Not Subject to NDA
3.2.3. S Parameters
3.2.3.1. ATS0 - Number of Rings to Auto Answer
The command controls the automatic answering feature of the DCE.
ITU-T Recommendation V.25 ter
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATS0=[<n>]
Set command sets the number of rings required before device
automatically answers an incoming call.
Parameter:
Name
Type
Default
Description
<n>
integer
0
Number of
rings
Values:
0
:
auto answer disabled
1÷255
:
number of rings required before automatic answer.
The DCE answers when the incoming call indication
(ring) has occurred the number of times indicated
by the value.
Data only products ignore command setting and auto answer is
disabled if incoming call is a voice call.