Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1384 of 1904 2022-03-04
Not Subject to NDA
3.18.17. AT#FTPLIST - FTP List
This command is used during a FTP connection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#FTPLIST[=[<name]]
Execution command, issued during an FTP connection, opens a data
connection and starts getting from the server the list of contents of the
specified directory or the properties of the specified file
Parameter:
Name
Type
Default
Description
<name>
string
-
is the name of the directory or file
The command causes an ERROR result code to be returned if no
FTP connection has been opened yet.
Issuing AT#FTPLIST<CR> opens a data connection and starts
getting from the server the list of contents of the working directory.
AT#FTPLIST=?
Test command returns the OK result code.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English