Telit Wireless Solutions LE910C series - AT#MQDIPP - Set DISCONNECT Packet Property for MQTT Transmission

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1818 of 1904 2022-03-04
Not Subject to NDA
3.32.18. AT#MQDIPP - Set DISCONNECT Packet Property for MQTT Transmission
Set DISCONNECT Packet Property for MQTT Transmission
MQTT Version 5.0
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#MQDIPP=<instance_number>,<identifier>,<value>[,<user_property_name>,<u
ser_property_value>]
Set command sets the DISCONNECT packet property for the selected MQTT client
Parameters:
Name
Type
Default
Description
<instance_number>
integer
-
Selects the client instance.
The list of available clients
is obtained with
AT#MQEN? or the read
command.
<identifier>
integer
N/A
Property identifier
Values:
17
:
0x11, Session Expiry Interval. <value>
mapping to this identifier should be
an integer
28
:
0x1C, Server Reference. <value>
mapping to this identifier should be a
string
31
:
0x1F, Reason String. <value>
mapping to this identifier should be a
string