Telit Wireless Solutions LE910C series - AT#CPBE - Emergency Numbers Programming

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 589 of 1904 2022-03-04
Not Subject to NDA
3.5.8. AT#CPBE - Emergency Numbers Programming
This command is used to write the emergency number to "EN" phonebook for carrier
certification.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#CPBE=<index>[,<number>]
Set command writes the emergency number to "EN" phonebook.
Parameters:
Name
Type
Default
Description
<index>
integer
N/A
index
Value:
1÷10
:
index
<number>
string
-
phone number
If <number> is omitted, the phonebook entry in location <index> is
deleted.
AT#CPBE?
Read command returns the emergency numbers stored by the user.
AT#CPBE=?
Test command reports the supported range of value for <index> and the
maximum length of <number>.