Telit Wireless Solutions LE910C series - AT#JDR4 GCFG - LTE Jamming Detection Threshold Configuration

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 364 of 1904 2022-03-04
Not Subject to NDA
3.3.3. AT#JDR4GCFG - LTE Jamming Detection Threshold Configuration
The command configures the LTE Jamming Detection thresholds.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#JDR4GCFG=<P_RSRP_T4G>,<P_RSRQ_T4G>,<P_RSSNR_T4G>
Set command allows to configure the LTE Jamming Detection thresholds.
After configuration, use the #JDRENH2 command to enable/disable LTE
jamming detection and select reporting mode.
Parameters:
Name
Type
Default
Description
<P_RSRP_T4G>
integer
30
set the threshold of RSRP. The
threshold (RSRP_Thr) is calculated as:
RSRP_Thr = RSRP_Av*(1-
(<P_RSRP_T4G>/100))
where RSRP_Av is the average of the
last 10 RSRP measures
Value:
0÷100
:
threshold of RSRP
<P_RSRQ_T4G>
integer
90
set the threshold of RSRQ. The
threshold (RSRQ_Thr) is calculated as:
RSRQ_Thr=
RSRQ_Av*(1+(<P_RSRQ_T4G>/100))
where RSRQ_Av is the average of the
last 10 RSRQ measures
Value:
0÷100
:
threshold of RSRQ