Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1685 of 1904 2022-03-04
Not Subject to NDA
3.28.1.11. AT$SLP - Update SLP Address
This command allows updating the SLP parameters.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$SLP=<slp_address_type>[,<slp_address:slp_port_number>]
Set command allows updating the SLP address and SLP port number.
Parameters:
Name
Type
Default
Description
<slp_address_type>
integer
1
SLP address type
Values:
0
:
IPv4
1
:
FQDN
3
:
IPv6
If <slp_address> is omitted, chosen <slp_address_type> will be
deleted.
IPv6 is passed in the following format:
AT$SLP=3,"[2001:db8:255::8:7]:7275"
The default value is following for China variants,
- CN_MOBILE/CN_UNICOM: "supl.google.com",7275
AT$SLP?

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English