Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 605 of 1904 2022-03-04
Not Subject to NDA
3.6.6. AT+CSDH - Show Text Mode Parameters
This command controls whether detailed header information is shown in text mode.
3GPP TS 27.005
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT+CSDH=[<show>]
Set command controls whether detailed header information is shown in
text mode (AT+CMGF=1) result codes.
Parameter:
Name
Type
Default
Description
<show>
integer
0
control the display of the result codes.
Values:
0
:
do not show header values (see Additional info section)
1
:
show the values in result codes
Additional info:
If <show>=0
do not show header values defined in commands +CSCA and +CSMP
(<sca>,<tosca>, <fo>, <vp>, <pid> and <dcs>) nor <length>, <toda> or
<tooa> in +CMT, +CMGL, +CMGR result codes for SMS-DELIVERs
and SMS-SUBMITs in text mode.
For SMS-COMMANDs in +CMGR result code do not show <pid>,
<mn>, <da>, <toda>, <length> or <cdata>

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English