Telit Wireless Solutions LE910C series - AT#GTP - Get Location from GTP WWAN Service

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1751 of 1904 2022-03-04
Not Subject to NDA
3.28.4.6. AT#GTP - Get Location from GTP WWAN Service
This command gets the location from GTP (Global Terrestrial Positioning) WWAN
service.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#GTP
Execute command returns a position based cellular database from GTP
(Global Terrestrial Positioning) WWAN service, in the following format:
#GTP: <latitude>,<longitude>,<altitude>,<accuracy>
Additional info:
Response
Name
Type
Default
Description
<latitude>
integer
N/A
Latitude (specified in WGS84
datum).
Value:
-90÷90.0
:
degrees; +/-: North / South
<longitude>
integer
N/A
Longitude (specified in WGS84
datum)
Value:
-180÷180.0
:
degrees; +/-: East / West
<altitude>
integer
N/A
Altitude with respect to the
WGS84 ellipsoid