Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 805 of 1904 2022-03-04
Not Subject to NDA
3.9.14. AT#AUTOATT - Auto-Attach Property
Execution command has no effect and is included only for backward compatibility.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#AUTOATT=[<auto>]
Parameter:
Name
Type
Default
Description
<auto>
integer
1
GPRS auto-
attach
property
Values:
0
:
disables GPRS auto-attach property
1
:
enables GPRS auto-attach property (factory default):
after the command #AUTOATT=1 issued (and at every
following startup) the terminal will automatically try to
attach to the GPRS service.
AT#AUTOATT?
Read command reports whether the auto-attach property is currently
enabled or not, in the format:
#AUTOATT: <auto>
AT#AUTOATT=?
Test command reports available values for parameter <auto>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English