Telit Wireless Solutions LE910C series - AT#CQI - HSDPA Channel Quality Indication

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 237 of 1904 2022-03-04
Not Subject to NDA
3.2.2.72. AT#CQI - HSDPA Channel Quality Indication
This command returns the channel quality indication of the <mode> parameter which is
PLMN mode bit in the CSP file with SIM.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#CQI
Execution command indicates channel quality indication in the form:
#CQI: <cqi>
Additional info:
CQI values:
Name
Type
Default
Description
<cqi>
integer
N/A
Channel Quality indication
Values:
0÷30
:
The value range for WCDMA. 1 (worst) – 30
(best)
0÷15
:
The value range for LTE. 1 (worst) – 15 (best)
0
:
out of range
31
:
Unknown or not detectable
AT#CQI=?