Telit Wireless Solutions LE910C series - AT#ADSPC - Audio DSP Configuration

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1009 of 1904 2022-03-04
Not Subject to NDA
3.12.3.4. AT#ADSPC - Audio DSP Configuration
This command used to switch the DSP profile audio path.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#ADSPC=<n>[,<ecns mode>]
Set command switches the DSP profile audio path depending on
parameter <n>.
Parameters:
Name
Type
Default
Description
<n>
integer
0
DSP profile configuration
Values:
0
:
Automatic
1
:
Hands Free
2
:
Headset
3
:
Handset
4
:
Speaker phone Bluetooth
5
:
TTY
6
:
USB
<ecns mode>
integer
0
ECNS mode
Values:
0
:
Disables ECNS mode
1
:
Enables ECNS