Telit Wireless Solutions LE910C series - Page 1010

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1010 of 1904 2022-03-04
Not Subject to NDA
- On Automatic mode:
Digital: handset
Analog: according to #CAP
- This command influence on the #CAP / #SRP.
- On Active/MT/MO Voice Call return Error.
- When #TTY command enabled, SET #ADSPC command return
Error.
- The <n> = 4 Speaker phone Bluetooth has no effect is included
only for backward compatibility.
- The <n> = 5 "TTY" only configured DSP profile to "Full TTY" mode,
to enable TTY mode and another TTY mode using by #TTY
command.
- The <n> = 6 is only supported by "Disable ECNS mode".
AT#ADSPC?
Read command reports the active DSP profile configuration in the format:
For TTY profile:
#ADSPC: <n>
For Another DSP profile:
#ADSPC: <n>,<ecns mode>
AT#ADSPC=?
Test command reports the supported values for the parameter <n>.