Telit Wireless Solutions LE910C series - AT#TONE - Tone Playback

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 994 of 1904 2022-03-04
Not Subject to NDA
3.12.2.2. AT#TONE - Tone Playback
This command allows the playback of either a single DTMF tone or a dial tone for a
specified period of time.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#TONE=<tone>[,<duration>]
Execution command allows the playback of either a single DTMF tone or a
dial tone for a specified period of time.
Parameters:
Name
Type
Default
Description
<tone>
mixed
N/A
ASCII character describing the tone to be
reproduced.
Values:
0÷9
:
DTMF tones from 0 to 9
#
:
DTMF tone #
*
:
DTMF tone *
A÷D
:
DTMF tones from A to D
Y
:
free tone
<duration>
integer
30
Duration of current tone in 1/10 of sec.
Value:
1÷300
:
tenth of seconds