Telit Wireless Solutions LE910C series - AT#PCMRXG - DVI Speaker Volume Level

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1037 of 1904 2022-03-04
Not Subject to NDA
3.12.6.5. AT#PCMRXG - DVI Speaker Volume Level
This command used to set the PCM audio RX volume.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#PCMRXG=<RX_VOL>
Set command sets the PCM Audio RX value.
Parameter:
Name
Type
Default
Description
<RX_VOL>
integer
N/A
PCM RX volume in RX path
Value:
-5000÷1200
:
-5000(-50 dB) ~ 1200(+12 dB)
- meaning of a RX_VOL is 1/100 dB step.
- meaning of -50 dB is mute
AT#PCMRXG?
Read command returns the current PCM Audio RX value:
#PCMRXG: <RX_VOL>
AT#PCMRXG=?
Test command returns the supported range of values of parameter
<RX_VOL>.