Telit Wireless Solutions LE910C series - ATS1 - Ring Counter

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 263 of 1904 2022-03-04
Not Subject to NDA
3.2.3.2. ATS1 - Ring Counter
S1 is incremented each time the device detects the ring signal of an incoming call. S1 is
cleared as soon as no ring occur.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATS1
The form ATS1 has no effect, returns OK result code.
ATS1?
Read command returns S1 value.