Telit Wireless Solutions LE910C series - AT#MQVCFG - Configure MQTT Version

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1804 of 1904 2022-03-04
Not Subject to NDA
3.32.13. AT#MQVCFG - Configure MQTT version
Configure MQTT version
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#MQVCFG=<instance_number>,<version>
Set command sets the MQTT version for the selected MQTT client
Parameters:
Name
Type
Default
Description
<instance_number>
integer
N/A
Selects the client instance. The
list of available clients is
obtained with AT#MQEN? or the
read command.
Value:
1÷maxClients
:
client instance range. to know
maxClients value use test
command.
<version>
integer
4
MQTT version
Values:
4
:
MQTT version 3.1.1
5
:
MQTT version 5.0
AT#MQVCFG?
Read command reports the currently selected parameters in the format:
#MQVCFG: <instance_number>,<version>