Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1332 of 1904 2022-03-04
Not Subject to NDA
3.17.47. AT#SSENDEXT - Send Data in Command Mode extended
This command allows to send data through a connected socket including all possible
octets (from 0x00 to 0xFF).
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SSENDEXT=<connId>,<bytestosend>
Set command permits, while the module is in command mode, to send
data through a connected socket including all possible octets (from 0x00
to 0xFF).
Parameters:
Name
Type
Default
Description
<connId>
integer
N/A
socket connection
identifier
Value:
1÷conMax
:
supported range. conMax value is
returned by test command
<bytestosend>
integer
N/A
number of bytes to be
sent
Value:
1÷1500
:
Please refer to test command for range.
Refer to additional info for more detail.
Additional info:
<bytestosend> - number of bytes to be sent :
The device responds to the command with the prompt
'>' <greater_than><space> and waits for the data to send.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English