Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 955 of 1904 2022-03-04
Not Subject to NDA
3.11.4. AT#SDM - Set SIM Toolkit Display Mode
This command is used to set normal/high priority standby display mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#SDM=<priority>
Set command sets to normal/high priority standby display mode.
Parameter:
Name
Type
Default
Description
<priority>
integer
0
priority
Values:
0
:
normal
1
:
high
AT#SDM?
Read command returns the current value of the <priority> parameter.
AT#SDM=?
Test command returns the range of values for parameter <priority>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English