Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1542 of 1904 2022-03-04
Not Subject to NDA
3.23.10. AT#TCPATCONSER - TCP AT Run Service on Serial Port
This command sets the TCP Run AT in transparent mode, in order to have direct access
to the serial port specified.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#TCPATCONSER=<port>,<rate>
Set command sets the TCP Run AT in transparent mode, in order to have
direct access to the serial port specified. Data will be transferred directly,
without being elaborated, between the TCP Run AT service and the serial
port specified.
Parameters:
Name
Type
Default
Description
<port>
integer
0
identifies the serial port
Values:
0
:
UART
1
:
USB1
2
:
USB2
<rate>
string
-
baud rate for data transfer. Allowed values
are 300,1200,
2400,4800,9600,19200,38400,57600,115200.
Additional info:
< port >
Not all of these ports will be available at the same time.
The port available will be displayed by the test command.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English