Telit Wireless Solutions LE910C series - AT$GPSSTOP - Stop Location Service Request

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1674 of 1904 2022-03-04
Not Subject to NDA
3.28.1.8. AT$GPSSTOP - Stop Location Service Request
This command is used to stop location service request.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Other
No
-
2
AT$GPSSTOP=<abort_cause>
Set command stops the Receiver in Autonomous or A-GPS mode initiated
through $GPSSLSR set command.
Parameter:
Name
Type
Default
Description
<abort_cause>
integer
1
set abort cause
Values:
0
:
user denies the request
1
:
unspecified cause for abort
2
:
cause Invalid
The <abort_cause> can be recovered by $GPSRST.
The current setting is stored through $GPSSAV.
The <abort_cause> option isn't supported. It has no effect and is
included only for backward compatibility.
AT$GPSSTOP?