Telit Wireless Solutions LE910C series - AT#SPKMUT - Speaker Mute Control

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 974 of 1904 2022-03-04
Not Subject to NDA
3.12.1.10. AT#SPKMUT - Speaker Mute Control
This command enables/disables the global muting of the speaker audio line.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Common
profile
No
-
2
AT#SPKMUT=<n>
Set command enables/disables the global muting of the speaker audio
line, for every audio output (ring, incoming sms, voice, Network coverage).
Parameter:
Name
Type
Default
Description
<n>
integer
0
muting of the speaker audio line
Values:
0
:
mute OFF, speaker active
1
:
mute ON, speaker muted
this command mutes/activates both speaker audio paths, internal
speaker and external speaker.
For LE910C1-EUX//SAX/SVX and LE910Cx-WWX product:
• this command enable/disable the muting of the speaker audio
line during a voice call.
• this command only enable/disable the voice call, not global mute.
AT#SPKMUT?
Read command reports whether the muting of the speaker audio line
during a voice call is enabled or not, in the format: