Telit Wireless Solutions LE910C series - AT$SUPLCFG - Configure SUPL TLS and Hash

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1688 of 1904 2022-03-04
Not Subject to NDA
3.28.1.13. AT$SUPLCFG - Configure SUPL TLS and Hash
This command permits to configure the SUPL TLS and Hash algorithm version.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$SUPLCFG=<tls>[,<hash>]
Set command configures the SUPL TLS and Hash algorithm version.
Parameters:
Name
Type
Default
Description
<tls>
integer
1
selects TLS version.
Values:
0
:
use TLS v.1.0
1
:
use TLS v.1.1
<hash>
integer
1
selects SHA version.
Values:
0
:
use SHA-1
1
:
use SHA-256
AT$SUPLCFG?
Read command reports the currently selected <tls> and <hash> in the
format:
$SUPLCFG: <tls>,<hash>