Telit Wireless Solutions LE910C series - AT#WKIO - Set RING CFG Parameters

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 255 of 1904 2022-03-04
Not Subject to NDA
3.2.2.83. AT#WKIO - Set RING CFG Parameters
This command configures the service.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#WKIO=[<Mode>[,<Pin>[,<Trigger>[,<Timer>]]]]
Set command configures the service.
Parameters:
Name
Type
Default
Description
<Mode>
integer
0
Enable\Disable for the feature.
Values:
0
:
Disable (default).
1
:
Enable.
<Pin>
integer
0
Set the outputs line for wakeup detection
Values:
0
:
Ring Only (default, GPIO4 always in HIGH state)
1
:
Ring & GPIO 4
2
:
GPIO 4
3
:
No Pins (GPIO4 always in HIGH state)
<Trigger>
integer
2
Line will be Wakeup By
Values:
0
:
SMS
1
:
CALL