Telit Wireless Solutions LE910C series - Page 256

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 256 of 1904 2022-03-04
Not Subject to NDA
2
:
SMS Or CALL (default)
<Timer>
integer
N/A
Set the time interval for the wakeup line
to be at HIGH state range (1-60) Sec
default 1 sec.
Value:
1÷60
:
sec
To received Pulse in the ring line you need to set AT\R=2 and save
profile (the ring wave shape will be Pulse only when call received).
To be able to wake up by SMS need to set the command
AT#E2SMSRI at power up.
AT#WKIO?
Read command returns the current settings of parameters in the format:
#WKIO: <Mode>,<Pin>,<Trigger>,<Timer>
AT#WKIO=?
Test command returns the supported values for the RINGCFG parameters:
#WKIO: (0,1),(0-2),(0-3),(1-60)