Telit Wireless Solutions LE910C series - AT#SIMSELECT - SIM Slot Switch

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 891 of 1904 2022-03-04
Not Subject to NDA
3.10.16. AT#SIMSELECT - SIM Slot Switch
SIM Slot Switch
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SIMSELECT=<slot>
Set command selects to activate one of the two SIM slots to support Dual
SIM Single Standby (DSSS).
Parameter:
Name
Type
Default
Description
<slot>
integer
1
SIM slot
Values:
1
:
SIM slot 1
2
:
SIM slot 2
To select SIM slot 2 on LE910Cx series, SIM slot 2 must be
activated by AT#ENSIM2 command (AT#ENSIM2=1).
AT#SIMSELECT?
Read command reports the activate SIM slot, in the format:
#SIMSELECT: <slot>
AT#SIMSELECT=?